What's New

August/September 2007

	Great Dane Brutus (140-1c) Great Dane Australia has released a new model into its ZTR range. “Brutus” is powered by a 27hp Kohler petrol engine with heavy-duty remote air cleaner and has either a 132cm or 155cm (52” or 61”) three-blade cutter deck using improved, long-life spindles. Operating Brutus is comfortable as the Zt has a full suspension seat and is controlled by twin levers that a re centrally located for “between-leg” operation. Each controls a separate hydrostatic wheel drive with 12cc hydro pumps. The Zero Turn unit comes with standard ROPS, has a maximum forward speed of 19km/h (12mph) and can be reversed as up to 8km/k (5mph). A large 38L (8gal) fuel tank allows long periods of operation before re-fuelling is necessary. Great Dane Australia is located at: 598 Old Northern Road, Dural 2158; (02) 9651 5366 1300 726 152 F: (02) 9651 5399 E: sales@greatdanemowers.net.
	John Deere EZTrak Residential ZTRs (200w-1c) John Deere has released its new consumer ZTR mower range. EZTrak residentials build on Deere’s successful commercial ZTrak range. The three models are powered by 18.5hp & 23hp B&S and 25hp Kawasaki engines and have 106cm, 122cm & 137cm (42” 48” & 54”) “Edge” decks made of 2.7mm, 3mm & 3.4mm fabricated steel respectively. The Zero Turn mowers are built on a tough 3.8cmx5cm (1-1/2”x2”) box steel frame. The deck castor wheels and castor towers have sealed bearings providing long-life and easy steering. The front castors are offset to assist manoeuvrability and trimming performance. All operating controls are placed close to the operator for maximum efficiency. The units have High-back seats (225 & 425 are 13” - 445 is 18”) with adjustable armrests; no-tools fore-aft seat adjustment with a 7.5cm (3”) range can be be used by the operator while seated. The 225 & 425 models have maximum speeds of: 11km/h (7mph) forward & 5.6km/h (3.5mph) reverse. The 445 can reach 13km/h (8mph) forwards and 5.6km/h (3.5mph) reverse. EZTrak mowers are backed by a 2-year consumer warranty (90-days commercial) and available from John Deere Dealers. To locate the nearest Dealer call 1800 800 981 or visit www.deere.com.au.
	Subaru RGV Petrol Generators (190w-2c) Crommelins has released two new petrol-powered Subaru generators. The RGV 12100 is rated 8.5kVA (10kVA max) and RGV13100T is rated 8kVA (10kVA max). The engines have an electric starter with back-up, light-pull recoil starter. Subaru RGV Series gen sets have high-quality, brushless, self-exciting, two-pole alternators. The RGV 12100 produces single-phase (240V) AC current while the RGV 13100T can also generate three-phase (415V) AC power. They have voltage regulators (AVR – RGV12100 & current trans – RGV 13100T) to ensure stable voltage output. The units are powered by Subaru 12.7kW (17hp) EH65D and 11.9kW (16hp) EH63D OHV V-twin engines with 653cm3 displacements. The economical, balanced engines incorporate long-life features such as forced oil lubrication and oil-sensor automatic shutdown. Large fuel 44L fuel tanks provide 8.9h and 10.8h continuous use at the rated output. Other features include quiet operation from the intake-exhaust system, large capacity muffler and an efficient low noise double element air cleaner. The gen sets also have a large battery tray that can accommodate cases up to 26 x 17 x 20.5cm Crommelins has more information about Subaru generators at: 139 Welshpool Road, Welshpool 6106 (PO Box 352, Bentley 6102); (08) 9350 5588 F: (08) 9451 6381 W: www.crommelins.com.au.
	Victa Launches New Trimmer Range (170w-3c) After several years focussed largely on its core mower operations, Victa has continued to diversify with the release of a new range of petrol trimmers. The range is powered by 26cc full-crank 2-stroke engines and incorporates an in-built clutch and anti-vibration system, yet only generates 80dB(A). The models vary in their shaft configurations. The “Tornado” is a bent-shaft unit. The “Tornado Plus” has a straight shaft offering professional ergonomics at a competitive price. On the other hand the “Razor” has a 7mm diameter solid straight drive. The trimmers feature Victa’s ergonomic, “Easy Change” multi-directional handle design allowing allowing users to move the handle into their most comfortable position for both trimming and edging as desired. All models also use Victa’s cast-alloy trimmer head that allows operators to quickly change pre-cut lengths of line. The units cut a 40-42cm swathe. Victa trimmers come standard with a pack of trimmer-line and padded shoulder-strap and are backed with a two-year warranty. Victa Lawncare has more information at: Freecall: 1800 356 632 W: www.victa.com.au.
	Hustler FasTrak 2007 (180w-1c) The original Hustler FasTrak introduced professional ZTR mowing into the reach of homeowners with smaller properties. The new FastTrak for 2007 has kept all of the great features while adding some more that make it an even better product and even better value. Although compact in size, the units feature upgraded thicker-wall (.188” vs .125”) frame tubing (lifetime warranty), Hustler’s heavy-duty, welded construction and “SmoothTrak” easy steering system (with patented park brake system). FasTrak 2007’’s new wider cut 122cm & 137cm (48 &54”) decks have increased blade-tip speed for improved cut quality and more efficient discharging of clippings as well as great productivity. The side-ischarge/mulching decks have foot-assisted deck-lift. Hustler decks fully-welded heavy-gauge steel yet provide a fine lawn finish. The following models are available in Australia: Kohler 14.1 kW (19hp) - 122cm (48”); Kawasaki 14.1kW (19hp) - 122cm (48”) & (21hp) - 137cm (54”); Honda 13.4kW (18hp) - 122cm (48”) & 14.9 (20hp) -137cm (54”). Hewlett Equipment is Hustler Australian importer and is based at: 823 Boundary Road, Coopers Plains 4108; (07) 3277 3233 F: (07) 3875 1160 W: www.hewlettequipment.com.au.
	Bushman Ute (120w-1c) PowerUp Lawncare Products has added the Bushranger Ute to its Commercial walk-behind Range. The tough utility is designed for the Australian environment. Powered by a 179cc Kawasaki commercial 6.0hp Engine on a heavy-duty steel chassis, it cuts though heavy and long grass with ease. A dual-element air filter keeps dust and debris clear of internal parts helping it to last longer. The 53cm (21”) pressed-steel deck has a four-blade swing-back cutting system, rotating grass screen and a large discharge chute. A large 2L fuel tank allows long periods between re-fuelling. PowerUp Lawncare Products has more information at: 11 Sodium Street, Narangba 4504 (PO Box 603, Redcliffe 4020); 1300 363 027 (07) 3385 4955 F: (07) 3385 4985 W:rgs.com.au.
	Little Bob Honda (100w-1c) The SupaSwift Ute range is the benchmark for utility mowers in Australia. The “Little Bob” is 53cm (21”) “Big Bob’s” smaller brother. The 45cm (18”) ute is now available with a Honda GXV160 engine option. The Little Bob Honda was originally developed as an export model exclusively for tropical countries where users regularly encounter the toughest, lush grasses. Such was its success that manufacturer Allpower had decided to release the unit in Australia. Allpower Industries has more information at: 319 Middleborough Road (PO Box 358) Box Hill 3128; (03) 9890 3344 F: (03) 9890 4249 W: www.allpower.com.au.
	New Honda Gen Sets Range (270w-1c) Honda PE has launched a versatile new mid-size generator range suitable for a raft of applications in the home, worksite and even leisure pursuits. Powered by Honda GX engines, the five “EP”models range in output from 2200kVA to 5500kVA. The EP2200CX (2200kVA - GX160), EP3100CX (31kVA-GX240), EP4500CX (4500kVA-GX340), EP5500CX and EP5500CXS (5500kVA–GX390) all feature large capacity fuel tanks for extended operating time, as well as the convenience of fuel gauges. EP units have anti-vibration engine mounts and large noise-suppressing mufflers. Stable power delivery comes courtesy of Honda's Automatic Voltage Regulator (AVR) system that automatically compensates for fluctuations when the generator's load changes. For functionality and added safety, an AC/DC circuit breaker and oil alert light are standard on all models, while an easy-to-use control panel features 15 amp sockets, battery charger and circuit protector. Equipped with a full steel frame to ensure engine protection and aid transportation, the EP range is also available with an optional four wheel dolly kit. The top of the range EP5500CX and EP5500CXS have a maximum output of 5500kVA and are powered by the mighty Honda GX390 engine. These two models offer the added capacity to run air compressors up to eight cubic feet per minute in blowing capacity, 140 Amp welders and 2 hp electric motors. All Honda generators feature Honda's easy start technology for hassle-free starting even after long periods in storage, and operate on standard unleaded fuel for greater convenience compared to two-strokes. For added convenience, electric start is optional on the EP5500CXS. Honda MPE has more information at: 1954-56 HumeHCampbellfield3061 PBag19 Somerton3062;(03) 9270-1111 F: 9270 1122 W: www.hondampe.com.au.
	ScanHi PowerGuard Gen Sets (250w-1c) Melbourne generator manufacturer ScanHi has expanded its range of “PowerGuard” controlled gen sets. PowerGuard systems are used to automatically control OPE like pumps and generators. PowerGuard control systems automatically start the generator after mains failure or a predetermined demand requires that the generator begin operation. This is especially useful for back-up power systems. The units can also be used in conjunction with ScanHi’s wireless remote controllers that allow an operator to start and stop the unit from up to 50m using a simple hand-held tool similar to a car auto-lock controller. Honda’s EU30is generator features a microcomputer-controlled sinewave inverter that guarantees commercial-quality electricity – making it ideal for use with frequency sensitive electrical equipment such as computers. The 3kVA unit uses a high-speed multi-point alternator that is integrated into the reducing weight and size by 25% - 50%. Output is max 3kW/240AC or 12A/12V DC. The EU30is also features an Eco-throttle that adjusts the engine speed to meet the load demand. This increases fuel economy whilst also reducing noise as the engine is not required to run at full capacity unnecessarily. The generator is Parallel Connection capable. This allows two EU30i’s to be quickly and easily linked using a special parallel connection cable to double output to 6kVA. With electric-starting and enough power to be used in a wide range of home, recreational and professional uses, the EU30is incorporates all of Honda’s portable power technology. Honda Abbotsford Power Equipment 60-62 Hoddle Street, Abbotsford 3067; (03) 9428 1429 F: (03) 9429 4526 E: scanhi@sws.net.au W: www.scanhi.com.au.
	Toro Titan Z - Z5200 (200w-1c) The gap between consumer and commercial Zero Turns is continually diminishing as is demonstrated by Toro’s new “Titan Z” Range. Ostensibly “Consumer” units, Titan Zs have 10cm (4”) deep, fully welded, 10-gauge steel decks with 2.5cm x 6mm (1” x ¼”) steel reinforcing strips along the leading edge. Built around a 5cm x 5cm (2” x 2”) box steel frame (12mm/1/2" larger than most comparable units) Titan Zs are powered by B&S ELS V-twins and use HydroGear’s new, high-load ZT2800 hydrostatic transmissions. The 121cm & 1320cm (48” & 52”) cutter decks has a foot-operated height adjustment system that allows the operator to easily lift the deck to change the minimum cut level or quickly raise the deck during operation to avoid scalping in uneven terrain. A maintenance free deck castor wheel assembly incorporates sealed bearings, for long life and smooth rotation regardless of the terrain. Titan Z’s three-spring absorption system combines with an 18” high-back seat (adjustable armrests) to give a most comfortable ride. Ergonomic hydraulic control-lever dampers provide smooth drive engagement, eliminating “jerky” operation while reducing operator arm fatigue. Toro Titan Zs are distributed by: Toro L&C division, 1/13 Downard Street, Braeside 3195; (03) 9580 7355, 1-800 033 531 F: (03) 9580 7399 W: www.toro.com.au.
	EverRide Hornet Diesel ZTR (210w-1c jpg) Powerup Lawncare Products has released the EverRide Hornet. The advanced ZTR has a top-mounted cooling fan providing 37¢ª heat reduction. The cooler hydrostatic fluid helps the mower last longer and perform better. Powered by a 13.3kW (17.9hp) Yanmar V-twin diesel, the Hornet comes standard with, ROPS and seat belt. A 44.8L tank gives long work times between refilling. Built around a frame that is 30% stronger than comparable machines, Warrior has twin hydro pumps and wheel drive motors. The mower has a fully-adjustable, suspension seat smooth ride over the roughest terrain. The Hornet also offers integrated motion-controlled lever-actuated integrated steering level disc brakes. There are two deck sizes available: 48¡± & 52¡±. Both are high-volume full-floating, 7-gauge steel, ¡°tunnel¡± decks that help grass stand up to be cut more effectively. The deck has the largest discharge area on the market (149sq in). Blade tip speeds exceed 340km/h (18,800 fpm). The EverRide Hornet has height-of-cut adjustment between 3.8-14cm. window between 2.5cm-15cm (1¡±-6¡±). The deck is easily raised with a foot-operated, spring-assisted pedal, from sitting position. EverRide¡¯s pulley angle compensation system maintains the proper pulley angle for maximum belt life. PowerUp LawnCare distributes EverRide from: 11 Sodium Street, Narangba 4504 (PO Box 603, Redcliffe 4020); 1300 363 027 (07) 3385 4955 F: (07) 3385 4985 W: www.rgs.com.au
	Spider Remote Controlled Slope Mower (180w-1c) Inlon has released a revolutionary new mower machine. The Spider is a remote controlled self-propelled unit designed for the maintenance of steeply sloping areas such as embankments, roadsides and hillsides. These areas are traditionally maintained by teams of brushcutter operators or tractor-powered reach-flail mowers. The Spider is a one-man operation that is transported to its worksite in its purpose-built trailer and towed simply by car or utility. It drives itself off the trailer and into work within minutes. The Operator stands away from the machine and is not required to exert himself to push, steer or swing the machine. This reduces the likelihood of strains and slips. It is not weight-bearing on the operator, is less tiring and exposes the operator to less noise and vibration compared to conventional pedestrian mowing alternatives. The Spider also boasts impressive productivity of up to 1.8 acres/hour because of its speed, cutting width and special cutting techniques. Spider is distributed by Inlon, 17 Catamaran Road, Ourimbah 2258 (PO Box 387 Swansea 2281); (02) 4389 1477 F: (02) 4389 1478 E: mail@inlon.com.au W www.inlon.com.au.
	New Walk-behinds Added To Parklander Range (170w-1c) The value-for-money Parklander range of walk-behind mowers has been extended with three new models. The Parklander PCS-5000 is the base walk-behind model with 18” heavy-duty steel base and a Quantum 50 engine. The unit also features an improved catcher, ball bearing wheels and comfort grip handle. This is followed by the PCS-2580, which features a new 19” alloy chassis, with “Superflow” deck and powerful 2-stroke engine. The Big Lightweight is great for large areas as it is very easy to push, which also makes it ideal for mowing slopes. The large capacity catcher, with two handgrips, allows for easy emptying. A strong steel 11-point height adjuster allows the operator a wide range of cutting heights. The PML-4680 is another 19” alloy chassis model, with similar features. A 5.5hp 4-stroke OHV engine powers this heavy duty unit. Other features include a heavy-duty catcher and handles. All Parklander mowers come with a two-year warranty. Parklands Power Products has more information at: 106 Belmore Road North (PO Box 213) Riverwood 2210; (02) 9584 7700 F: (02) 9153 9122 W: www.parklands.net
	Victa Expands Tornado Range (150w-1c) Victa has expanded its successful Tornado mower range with a new electric unit. The Victa Tornado Electric is a premium, fully featured electric rotary mower. The 36cm (14”) deck unit has a high-performance motor and metal cutter blade. The mower has a central 7-stage height adjustment ranges from 1.6 – 7cm (0.6”- 2-3/4”). Its innovative, lightweight, easy-to-remove catcher is enclosed within its chassis, minimising dust and pollen circulation making it ideal for allergy sufferers and asthmatics. The handlebars can be adjusted to numerous positions for easy handling while an in-built, variable position auto-stop mechanism provides added safety. Aimed at medium density homeowners with smaller lawns and gardens where space is at a premium, the compact unit can be stored vertically taking up minimal space. Victa Lawncare has more information at: 1 Moorebank Avenue, Moorebank 2170 (Locked Bag, Milperra B C 1891); (02) 8778 5555 F: (02) 8778 5500 W: www.victa.com.au.

This web site is supplied strictly on the condition that Glenvale Publications and Power Equipment Australasia, its employees, agents, authors, editors and consultants are not responsible for any deficiency, error, omission or mistake contained in this web site, and Glenvale Publications and Power Equipment Australasia, its employees, agents, authors, editors and consultants hereby expressly disclaim all liability of whatsoever nature to any person who may rely on the contents of this web site in whole or in part. No portion of this web site, in whole or in part, may be reproduced without the written permission of the publisher.