What's New

April 2007

	New Crommelins Light Tower Crommelins has released a new lighting tower that attaches to Subaru 3200iS and 4300iS Silent Inverter generators. Many portable lighting towers can have fluctuating light intensity due to unstable power generation, which can result in inconsistent lighting and shadowing. However, these gen sets provide excellent power for the tower due to their low noise output and superior inverter technology. The Inverter control system achieves high quality output with less fluctuation and wave distortion and allows the engine speed to be automatically adjusted in direct proportion to the load applied maximising fuel efficiency, while maintaining a constant 240V (50Hz) supply. The tower/generator combination meets EPA Tier II, CARB Tier II, LEMA and EU emission regulations. The mast rotates 360¢ª and can reach a maximum 4.6m. It carries 5 x 500W halogen lights that rotate 3 and is raised by a manually operated pneumatic pump. Crommelins has more information at: 139 Welshpool Road, Welshpool 6106 (PO Box 352, Bentley 6102); (08) 9350 5588 F: (08) 9451 6381 W: www.crommelins.com.au.
	GB Bar & Chain Combos (110-1c) GB Products has released a new range of Bar & Chain “Combo’s” and pre-packaged saw chain loops that cater for 80% of products currently available in Australia. There are two ranges: Professional Combos contain a pro one-piece, solid bar and 3/8th pitch chain for maximum performance. Casual Combos combine high-performance laminated guide bars with low-profile 3/8th bumper-link safety chain. All models in GB’s new 25 bar range will have complimentary saw chain loops available. Dealers can merchandise the products using GB’s new display stands. For more information contact: GB Products, 40 Berkshire Road (PO Box 590) Sunshine 3020; (03) 9300 5555 F: (03) 9312 5796 W: www.gbbar.com.au.
	Versatile Husqvarna 460 (160w-1c) The versatile Husqvarna 460 is equipped with the revolutionary X-TORQ engine delivering up to 10% more cutting power at lower engine speeds for better cutting performance. The 60cc unit also uses Husqvarna E-TECH II technology that reduces emissions and fuel consumption without compromising performance. Generating 2.7kW (3.7hp) the ergonomically designed saw features a smooth underside with a rounded starter cover and well protected controls to make it easier to handle. Its asymmetrical rear handle provides better support for the right hand, improving grip and reducing operator fatigue. The 460 is packed with features including Husqvarna’s LowVib anti-vibration system, Smart Start decompression valve, Air Injection and inertia activated chain brake. The 460 has a precision-forged, three-piece crankshaft, reinforced crankcase and heavy duty muffler, making it ideal for those who require a high powered, heavy-duty and responsive workmate for all cutting conditions. For more information contact Husqvarna: Corner Debenham & Chivers Roads, Somersby (Locked Bag 18, Gosford) 2250; (02) 4372 1500 F: (02) 4372 1322 W: www.husqvarna.com.au
	JAK Max Cordless Chainsaw Grinder (120-1c) Parts and accessory supplier JAK Max has released a new portable chainsaw grinder. The “cordless” battery-powered unit allows users to easily sharpen saw chain, while still on the guidebar at any location. Made from rugged high-impact plastic, the 9.6V unit comes supplied with three stones. It provides variable speed grinding up to 30,000rpm. Because of its direct drive, there are no parts belts to require replacement. The Grinder incorporates a 30o angle indicator to enable accurate sharpening. The competitively priced cordless grinder is supplied with charger, stones etc in its own plastic carry box. JAK Max is located at: 20 Cranwell Street, Braybrook 3019; (03) 9318 6333 F: (03) 9318 3355.
	Jonsered Spin-Start Saws Jonsered has introduced its Spin Start chainsaw range. Spin Start is new easy-start feature. The main component is a spring-assisted starter that helps turn the flywheel when it is most difficult (eg cold). Other features include an air purge and decompression valve (on the larger model). The result is reduced compression when starting. This increases user convenience and operating efficiency. There are three saws in the Jonsered Spin Start range: CS2138S (42cc/1.7kW), CS2141S (41cc/2kW) & CS2145S (45cc/2.2kW). All feature Jonsered’s Turbo Air cleaning system for longer intervals between filter cleans, smoother operation, steel-spring vibration dampening and an inertia-activated chain brake. The saws are powerful all-round units giving pro qualities and easy to start at a competitive price. Jonsered equipment is distributed by Husqvarna, Corner Debenham & Chivers Roads, Somersby (Locked Bag 18, Gosford) 2250; (02) 4372 1500 F: (02) 4372 1322 W: www.jonsered.com.au
	Kohler Residential Generators Engineered Products Group (EPG) has released Kohler Engine’s Residential Generator range in Australia. Designed specifically for Homeowners and Small Business Owners, the new range has features including easy installation, high power output and quiet operation. Operating at about 65dB(A), the compact unit is no louder than a traditional vacuum cleaner. As power supplies become less reliable small-business owners appreciate the benefits of having worry-free, non-stop emergency protection from power outages. Having an automatic generator power up within seconds of a power failure can protect computers, security systems and other power-sensitive amenities. The new Kohler Gen Sets do not require a concrete pad to be constructed as the have a convenient built-in mounting pad. Smaller than a typical air-conditioning unit, the new Kohler range is available in 8.5kW or 12kW outputs (fuelled by either LP or natural gas). EPG distributes Kohler engines and generators from: 31 Powers Road, Seven Hills 2147; (02) 9830 2200 F: (02) 9830 2383 W: www.epg.com.au.
	Power Mower – The Logsplitter (110w-1c) Power Mowers has released a new log-splitter. The unit is made for tough work. Powered by a 9hp B&S Vanguard OHV engine, it has a massive 13 x 50cm (5"x 24") heavy-duty ram with cast iron pump and valve bodies. The frame is extra heavy-duty, with 2.5cm (1”) thick supports. It features automatic reverse and has standard knock-off. The Power Mower Log-splitter is also designed to be operated either vertically or horizontally (depending on user preference). Power Mowers is located at: 21 Glen Osmond Road, (PO Box 152) Eastwood 5063; (08) 8272 4988 F: (08) 8272 0895 E: powermow@senet.com.au.
	Stihl MS441 (220w-1c) The new Stihl 441 chainsaw engines feature low fuel consumption, while having sufficient reserves of power to tackle the most demanding of jobs – including big timber. Computer controlled ignition timing delivers faster acceleration and easier starting, as well as better peak performance during heavy cutting. This is made possible by Stihl’s “Four-channel” technology and “stratified scavenging” systems, which reduces exhaust emissions by over 50%. Four overflow channels swirl the fuel-air mix before ignition, giving optimum combustion for highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range. During the flushing process, a fuelfree layer of air is created between the burned charge in the combustion chamber and the fresh load in the crankcase. This cushion reduces the fuel content of the discharge from flushing in the charge cycle – reducing the effects on the user and the environment. The new engines have up to 20% lower fuel consumption than conventional two-strokes, and already meet the requirements of the coming EU Stage II emission standard. The chainsaws have a 70.4cm3 displacement generating 4.1kW (5.6hp) and incorporate a new anti-vibration system that cuts levels by 25% without sacrificing control. The saw uses guidebars between 40-50cm. Stihl is located at: 5 Kingston Park Court (PO Box 74 MDA) Knoxfield 3180; (03) 9215-6666 F: (03) 9763 4423 W: www.stihl.com.au
	Oleo-Mac 937 & 941CX (120w-1c) Oleo-Mac’s new multi-purpose chainsaws have 35cc and 39cc displacements generating 1.6kW (2.2hp) and 1.9kW (2.5hp) respectively while weighing only 4.1kg and 4.2kg. They use 14” and 16” guide bars. The 937 is fitted with 3/8” LP chain while the 941CX has .325”chain. Oleo-Mac’s “Easy On” and “Primer” devices combine with electrically adjusted digital coil to make the units easy to start. Ergonomic handle, adjustable oil pump, anti-vibration and integrated on/off switch, choke and semi-acceleration controls make the saws easy to use. Maintenance is easy with side-mounted chain tensioner, easy-access tool-free airfilter, inspectable muffler and durable nylon filter. Oleo-Mac products are distribute by: Parklands Power Products, 106 Belmore Road North (PO Box 213) Riverwood 2210; (02) 9584 7700 F: (02) 9153 9122 W: www.parklands.net .
	Robin Back-Pack Blower (190w-1c) Crommelins Machinery has released the powerful Fuji Robin backpack blower. Powered by a new 75.6cc 4-Stroke OHV Subaru engine the Model FL-H7500 Engine is designed to give high performance, easy handling and maintenance. The engine has a wedge-shaped combustion chamber with a smooth, curved intake port that maximises combustion efficiency delivering 20% better fuel efficiency and much lower oil consumption to that a 2-stroke of the same size. The cylinder head and cylinder use Subaru’s exclusive separate design giving easy maintenance. It also has a large capacity air filter for improved dust control. The engine complies with EPA Phase II, CARB Tier III and EU Stage II emission regulations. With only 99.1dB(A) at the operator’s ear, the FL-H7500 boasts the lowest noise emissions of units in this class. The blower itself is ergonomically designed with a simple joystick operator control. It delivers 14.9m3/min at a maximum nozzle air speed of 313km/h (87m/sec). Weighing 10.8kg (without blower tube) the unit is backed by a 2-year warranty. Crommelins Machinery has more information at: 139 Welshpool Road, Welshpool 6106 (PO Box 352, Bentley 6102); (08) 9350 5588 F: (08) 9451 6381 W: www.crommelins.com.au.

This web site is supplied strictly on the condition that Glenvale Publications and Power Equipment Australasia, its employees, agents, authors, editors and consultants are not responsible for any deficiency, error, omission or mistake contained in this web site, and Glenvale Publications and Power Equipment Australasia, its employees, agents, authors, editors and consultants hereby expressly disclaim all liability of whatsoever nature to any person who may rely on the contents of this web site in whole or in part. No portion of this web site, in whole or in part, may be reproduced without the written permission of the publisher.